Below are the online and classroom course descriptions. Select a course to view its content, required frequency, training format, and who needs the course.
Aerial Scissor Lift
Standards 29 CFR 1910.67 and 1926.453 of the Occupational Safety and Health Administration (OSHA) covers the operation of vehicle-mounted elevating and rotating work platforms and aerial lifts. In summary, these standards spell out specific requirements as to the construction, modification, and safe use of the equipment and training of operators.
Required: Every 3 years
Training format: Online training
Who needs this class: Carpenter, Roofers, Painters, Steam Plant or Tunnel Worker, Groundskeeper, Electrician
Asbestos Awareness
Asbestos awareness training discusses OSHA’s Asbestos Standard (29 CFR 1910.1001), types and properties of asbestos, health effects related to asbestos exposure, preventing exposure to asbestos, methods for controlling asbestos fiber release, and asbestos abatement basics.
Required: Annually
Training format: Classroom training
Who needs this class: Building Maintenance Worker, Carpenter, Custodian, Painter, Electrician, Engineer, Facility Manager, Project Manager – Facilities or Construction, Roofer, Sheet metal Worker, Steam Plant or Tunnel Worker
Back Safety
Back Safety is a 15 minute presentation which discusses one of the most common workplace injuries, what you can do to help prevent back injuries, how to use proper lifting, load carrying, unloading techniques, and safe practices. This training class is mandatory for all employees with job tasks involving excessive lifting or lifting 50 pounds or more to ensure that all lifting tasks are done following proper lifting techniques.
Required: Once
Training format: Online training
Who needs this class: Building Maintenance Worker, Carpenter, Custodian, Painter, Electrician, Engineer, Groundskeeper, Inventory Clerk, Locksmith, Mechanic, Roofer, Sheet metal Worker, Steam Plant or Tunnel Worker
Backhoe/Loader Operations
The Tractor Operator training module is designed for personnel who will be using tractors on campus for any purpose. Objectives included in this training include understanding the purpose of a tractor, the characteristics of a tractor, recognizing hazard groups, tractor stability, identifying controls/instrumentation, and safe use of a tractor.
Required: Once
Training format: Online training
Who needs this class: Selected personnel from the grounds crew
Bloodborne Pathogens
Bloodborne pathogens training discusses OSHA’s Bloodborne Pathogens Standard (29 CFR 1910.1030), bloodborne diseases, exposure determination, methods of compliance, personal protective equipment, Hepatitis B Vaccine, post-exposure evaluation and follow-up, labels, and signs.
Required: Annually
Training format: Online training
Who needs this class: Athletic Trainer, Building Maintenance Worker, Carpenter, Custodian, Engineer, Facility Manager, Groundskeeper, Police Officer
Confined Space
Confined spaces training discusses OSHA’s Confined Space Standard (29 CFR 1910.146), evaluation of a confined space, signage requirements, confined space hazards, entry requirements and procedures, job tasks, emergency situations and responses, and training requirements.
Required: Annually
Training format: Classroom training
Who needs this class: Engineer, Steam Plant or Tunnel Worker
Electrical Safety (General)
Electrical Safety – General training is a 30 minute presentation that discusses electrical hazards, electrical injuries, arc flash and arc blast, emergency response, first aid for electrical shock, using an AED, power lines, use of electrical equipment, circuit protective devices, lockout/Tagout procedures, and safe work practices.
Required: Once
Training format: Online training
Who needs this class: Carpenter, Custodian, Painter, Electrician, Engineer, Locksmith, Mechanic, Roofer, Sheet metal Worker, Steam Plant or Tunnel Worker
Electrical Safety (NFPA 70E)
This course provides information and training required of employees and employers working on live electrical circuits. The topics covered include: ARC-flash hazards, Personal Protective Equipment, Approach Boundaries, Energized Work Permits, and other required knowledge.
Required: Once
Training format: Classroom training
Who needs this class: Electrician, Engineer, Steam Plant or Tunnel Worker
Ergonomics
This training is for employees who want more information on preventing cumulative trauma disorders.
Required: Once
Training format: Online training
Who needs this class: Staff
Fall Protection
Fall protection discusses OSHA’s Fall Protection Standard (29 CFR 1926.500-503), full body harnesses, user equipment, including lanyards and self-retracting lifelines, site specific systems, and equipment inspection.
Required: Once
Training format: Classroom training
Who needs this class: Electrician, Engineer, Roofer, Sheet metal Worker, Mechanical Staff
Fire Safety & Evacuation
Fire safety and evacuation training discusses the fire response plan RACER, ways to report the presence of a fire, methods of evacuation, procedures for employees with disabilities, types of extinguishers, classes of fires, and the steps of the PASS procedure for the operation of fire extinguishers.
Required: Once
Training format: Online training
Who needs this class: All UA Little Rock Employees
Forklift Safety
Forklift/power lift operation and safety training discusses OSHA’s Powered Industrial Trucks standard (29 CFR 1910.178), different types of forklifts and power lifts including propane, gas and electric powered, as well as electric powered pallet lifts. At the end of this training, you will be able to perform an operation safety inspection, recognize any deficiencies which could create an unsafe condition in the operation of a forklift or power lift, identify hazards in your workplace, and operate and perform the duties of a forklift operator in a safe manner.
Required: Every 3 years
Training format: Classroom training
Who needs this class: Carpenter, Electrician, Inventory Clerk, Mechanic, Roofer, Sheet metal Worker, Steam Plant or Tunnel Worker
Hand & Power Tool Safety
This training provides an introduction to hand and power tool safety. Topics include potential hazards, injury prevention, proper tool selection, transportation and maintenance, and appropriate PPE.
Required: Once
Training format: Online training
Who needs this class: Carpenter, Electrician, Engineer, Locksmith, Mechanic, Steam Plant or Tunnel Worker
Hazard Communication
Hazard Communication is a 30 minute presentation that discusses where you encounter hazardous chemicals, why prevention is important, the hazard communication standard, Globally Harmonizing Systems (GHS), employee responsibilities, forms of hazards, detection and monitoring, hazards at your facility, how chemicals enter the body, chemical labeling, Safety Data Sheets, PPE, and emergency response.
Required: Annually
Training format: Online training
Who needs this class: Building Maintenance Worker, Carpenter, Custodian, Painter, Electrician, Engineer, Facility Manager, Groundskeeper, Inventory Clerk, Locksmith, Mechanic, Police Officer, Project Manager – Facilities or Construction, Roofer, Sheet metal Worker, Steam Plant or Tunnel Worker
Ladder Safety
This 20 minute presentation will identify common causes of ladder accidents; how to select, inspect, and set up ladders correctly; and how to climb, work on, maintain, store, and transport ladders safely.
Required: Once
Training format: Online training
Who needs this class: Building Maintenance Worker, Carpenter, Custodian, Painter, Electrician, Engineer, Groundskeeper, Inventory Clerk, Locksmith, Roofer, Sheet metal Worker, Steam Plant or Tunnel Worker
Lockout/Tagout
Lockout/Tagout training discusses OSHA’s Lockout/Tagout Standard (29 CFR 1910.147), hazardous energy sources, energy-isolating devices, additional safety requirements such as group lockout/Tagout, and refitting equipment.
Required: Annually
Training format: Classroom training
Who needs this class: Carpenter, Electrician, Engineer, Mechanic, Steam Plant or Tunnel Worker
Personal Protective Equipment
The 30 minute online Personal Protective Equipment for Non-Laboratory Personnel training will review hazard assessments, when personal protective equipment is necessary, and how to select, properly wear, and maintain appropriate personal protective equipment.
Required: Once
Training format: Classroom training
Who needs this class: Building Maintenance Worker, Carpenter, Custodian, Painter, Electrician, Engineer, Facility Manager, Groundskeeper, Locksmith, Mechanic, Project Manager – Facilities or Construction, Roofer, Sheet metal Worker, Steam Plant or Tunnel Worker
Respiratory Protection
Respiratory protection-half mask/full face piece training discusses OSHA’s Respiratory Protection standard (29 CFR 1910.134), types of respirators, maintenance of respirators, and fit testing procedures. This 2-hour training class is mandatory for all employees whose job classifications may involve duties which result in breathing air contaminated with harmful dusts, fogs, fumes, mists, gases, smokes, sprays, or vapors which otherwise cannot be controlled through the use of administrative or engineering controls or employees who voluntarily use respirators.
Required: Annually
Training format: Classroom training
Who needs this class: Carpenter, Engineer, Laboratory Technician, Researcher, Roofer, Sheet metal Worker, Steam Plant or Tunnel Worker
Slips, Trips, & Falls
This course covers various OSHA regulations and other standards. The module also explores the different types of slips, trips, and falls. Finally, participants will be introduced to the components of effective trip, slip, and fall prevention: recognize, evaluate, and control.
Required: Once
Training format: Online training
Who needs this class: Recommended for all UA Little Rock Employees
Supervisor Safety Responsibilities
Know the University Safety & Health Procedures that apply to your work area. Make sure proper equipment is available for tasks. Ensure that employees have reviewed JHA. Enforce safety rules. Know the safety risks of processes within your area of responsibility. The Safety and Health Program is the responsibility of each employee, supervisor, and administrator.
Required: Once
Training format: Classroom training
Who needs this class: All supervisors
Workplace Office Safety
This course helps to remind employees of safety problems that can occur in the office as well as what can be done to address these problems. this training program is designed to present the fundamentals of good office safety.
Required: Once
Training format: Online training
Who needs this class: Staff employees